Picnicing Quilt Carrier – Tutorial

Hello Dear Friend,

What an excellent tutorial I have for you today. It’s the final reveal of the Picnicing Quilt Carrier I created for the ever-loving quilt makers that want just a bit more ease while toting around those quilts we are all so proud of.

I love my quilts! I’m incredibly proud of all my handmades! What I don’t like is carrying them on the go. They flop around in my arms, come undone, drag along and in many occasions have tumbled straight onto the dirt. It’s happened to you too, I’m sure.

For this reason I know every quilter, or parent for that matter needs to make one of my Picnicing Quilt Carriers. You will thank me, and wonder just as I have why this wasn’t done sooner. 😉

Here’s the list of materials:

(2) 14″ x 10″ Fabric
(4) 32″ x 1.5″ Fabric
(1) 14″ x 10″ Flex 1-Sided Fusible Foam Stabilizer
(2) 32″ x 1.5″ Cotton Batting
(1) Adjustable Shoulder Bag Strap with Tabs
(2) 1″ Metal Swivel Hooks
(2) 1″ Metal “D” Rings
(2) 1″ Metal Slide Buckles
Sewing, Quilting & Heavy Duty Upholstery Thread

Here are a few of the materials I used and their affiliate links:

Let’s get on with the show!

Pick your prettiest two coordinating prints for the main body of the quilt carrier. I used the new floral prints in Poppie Cotton’s latest line Goose Creek Garden called Wildflowers Red and Soft Breeze Pink. The deep red Wildflower fabric is so beautiful to me. It was also an unusual choice as I usually pick lighter and brighter floral fabrics. Since I’m the one that will be using this carrier, I opted for a more mature colored floral and so glad I did. The great thing about this carrier is you can use any type of material you’d like, such as canvas, vinyl, upholstery, faux fur, etc. and it would look good in all of them!

Cut them down to 14″ x 10″ each. Take the print you plan to use as the outer shell and iron it onto the foam stabilizer. It’s your choice to round the corner like I did or keep them squared. Here I used a two inch round to trace and cut out the corners.

With just the top fabric and stabilizer fused together, quilt a fun design onto your quilt carrier base. I wish all quilting was this quick and easy. Haha!

Press the stitches then pin the bottom layer fabric on with right sides together. You will sew a 1/4″ seam around the entire piece leaving a two inch gap for turning.

Press, snip small v’s on the round corners, being careful not to cut through the thread seam. Turn inside out and press again. I like to soak my edges and iron a crisp edge, especially on the round corners. Take your time, this can make your carrier look sharp, or sad… 😦

Stitch an 1/8″ seam around the entire edge especially the open gap. Going around again, add another seam 1/4″ inside the previous one. Finishing with two seams looks oh so niiice!

Let’s make the adjustable carrying straps now. Here is the Country Confetti basic cotton I used also from Poppie Cotton in Weathered Wood. Friends, this color is a darker gray but not too cool toned, it’s versatile and I’ve already used it in multiple projects because I love it so.

The weathered wood gray also looked excellent next to my brass metals hardware, it was an obvious yes! Take two of your 32″ x 1.5″ fabric strips, line them up right sides together, add a strip of cotton batting of the same size to one side and pin. Repeat with the other two pieces and batting.

You can round the corners of one end on each strap if you would like, but I left mine squared. Sew a seam around the entire edge, leaving one end open on both straps. Turn them inside out and press crisp edges.

Now add a 1/8″ outer seam along all the sewn edges. The reason I sew such a small seam is because it’s easy to let my machine guide the fabric along the foot’s edge. You thought I had a good reason didn’t you? But I’m really just a lazy sewist. Ha!

Here’s where the real measurements come in. We’re going to attach the metal hardware and want it to look just right. Speaking of hardware, the set I ordered came with all that I needed metal swivel clasp, “D” ring and slide buckles all in a handy little box that is now holding my collection of metal accessories.

With the open end of the carrier straps, measure a 1/2″ mark and 1.5″ along the strap (see purple markings). Insert your “D” ring, fold the half marking up to the second line at 1.5″, pin as shown. Carefully sew two lines with a heavy duty thread to ensure it won’t come undone. Repeat with the second strap.

Along both 9″ ends of the quilted carrier measure and mark 1.5″ away from the edges as shown. You will pin the carrier straps on the inside of this marking leaving the “D” rings hanging off the front edge.

With a heavy duty thread, sew them together following the previously stitched line on the carrier straps, adding some extra seams on both ends to secure. So far so good? It should look like this.

No seams needed when attaching the slide buckles and clasp. Take the carrier straps in the back and weave them through the slide buckles, through the clasp ring and down into the buckle again. Now they should feel secure. If not you will have to get smaller buckles that hold a little tighter so the quilt straps don’t slide out.

It’s ok to stop and admire those adjustable straps. I was a bit proud of myself after that step too!

Final step is adding the purse strap to the top. There are so many options available. I chose to go with a dark brown leather strap to compliment my wildflower red fabric. While I love the look of the purse strap I used it’s a bit more stiff than I had hoped for.

Still it’s a beautiful finish especially with the petal shaped tabs. Very pretty! Measure the quilted carrier lengthwise and find the center line for tab placement. Depending on the tabs you have your step may look different than mine.

I knew with the tab’s leather finish, my sewing machine would have eaten right through and added stitch holes in the unmarked areas. So, I opted to hand sew them on with multiple pieces of heavy duty thread in a matching color that I sewed onto the outer material only.

In the pic you can see the stitches did not go through to the back. It’s a clean finish that I’m very happy with.

Do what you think will look best with your strap, because this last step finishes your carrier.

So, what do you think? Your very own Picnicing Quilt Carrier and it was much easier to make than expected. Once you have all your materials, this quilted accessory comes together in a short afternoon.

Will you make it again? Make one for a friend? I think it’s an automatic win for all the quilty friends in your life.

And it looks so pretty!

I keep admiring my quilted, feminine, modern Picnicing Quilt Carrier. It’s going to be on full display as I take it on family picnics and the current soccer season.

Let me know your thoughts in the comments, or on Instagram @linenbouquet. For a share use the #PicnicingQuiltCarrier I really want to see your designs and the adventures you take your quilts on.

with love, Jasmine

Favorite Block Tote Bag Tutorial

Hello Dear Friend,

What have you been up to? I have been working behind the scenes on creating some content for you, a bit of drawing and some secret sewing that I’ll be able to share with you soon. It’s so hard keeping it a secret though. All the hours of work I put into secret projects, and I can’t post about them yet. Hahaha! Learning how to blog is proving to be a bit more difficult than expected. Secret projectes sure don’t help, but I’ll be able to share soon enough.

On to the topic at hand. Prior to blogging I was in the habit of sewing projects off the top of my head, letting my creativity flow and never really thinking that anyone would like to know the how-to’s of my finished piece. I would forget to write down the steps as I go as well as the measurements of fabric. By the finished end, I would have a piece that I was quite pleased with until it would don on me that maybe someone else would have been interested in making one too. Hmmm… but the road to creating it was too winding to try and write it all down afterwards. This has actually kept me from even posting finished projects on Instagram, because I’m afraid of the dreaded question, “Can you share the pattern?” Yikes! However, that is one thing I planned to change this year and why I forced myself to start this blog. But old habits die hard. Only one month into the new year, I was holding a super cute finished tote bag with no notes on how it came to be. Oops, I did it again!

Thinking that I may let it slide, I casually asked on Insta if anyone would even be interested in the pattern thinking, “Does anyone even hear me out there?” To my great surprise, I got one, then two! I guess there’s a space for me afterall. Thank you to the sweet friends that boosted my morale and got me to backtrack my steps in making this purse. This one’s for you!

Favorite Block Tote Bag Tutorial

Here’s the deal, I’ve got a big stash of fat quarters but I’m a minimalist when it comes to larger cuts, so I made this purse fq friendly. We’ve got to use those cute fq’s somehow, right? Also, this is a smaller tote bag so while it can be used for adults I made these for my little ones.

Dots and Posies fabric collection by Poppie Cotton
  • Pick 6 Fat Quarters + a 9″ unfinished block you love!
  • 1 yd of Adhesive Foam Interfacing
  • Adhesive Stabilizer
  • 6″ Zipper
  • Round Lid or cut out 2″ diameter
  • Scissors
  • Ruler
  • Fabric Pen

For the front panel of the purse I used a super cute foundation paper pieced block pattern called, “Planting Seeds,” that measured 8 ½ ” finished. You can use a favorite block of your choice or a cute printed fabric.


Center Block 9″ Square (1)

FQ 1    A  9” x 2 3/8“ (2)

B  12 ¾” x 2 ½” (2)

C  12 ¾” Square (1)

FQ 2    D  13 ½” x 6 ¾” (1)

FQ 3    E  12 ¾” x 6 ¾” (1)

            F  7” x 6 ½” (2)

FQ 4    G  12 ¾” x 3 ¼” (2)

            H 18” x 2 ¼” (2)

FQ 5    L  12 ¾” Square (1)

            J  9 ¾” x 4” (1)

            K  6 ¾” x 1 ¼” (1)

FQ 6    L  21 ½” x 2” (4)

            M  9 ¾” x 4” (1)


25” x 12 ¾” (1)

9 ¾” x 4” (1)

21 ½” x 2” (2)


6 ½” square (1)


Since the heart tote was pre-made, I took pictures of the progress of another bag so you can follow along. You’ll notice the different colored fabric but the steps are all the same. You are going to love how easily this tote bag comes together. I’ve made three so far! Grab your energy juice and let’s get started.

Pick your 9″ block and 6 FQ’s (or 7 FQ’s if you choose not to use a stitched block) and cut out pieces needed.

First you’re going to make the front panel. Grab your 9” block and pin pieces A to the top and bottom, sew (all seams will be sewn with a ¼”), and press open.

Pin B pieces on the right and left, sew and press. Boom! Front panel is done. Told you that was easy. Set it aside.

Now let’s move on the back. You will grab piece D fold it in half, press. Open it up and tuck the 6 ½” square stabilizer in the crease. Press it folded. This piece will be the back pocket.

Grab the small trim piece K and press it half way lengthwise. We are going to make this into bias tape to run along the top of the back pocket. Open it up and press both raw edges in to the middle crease. Pin the trim over the top of the back pocket piece, sew and press.

Now I like to tack the back pocket to the back center panel, piece E. Be sure the pocket is straight, then sew a few stitches at the points where the pins were placed to secure the pocked before the next step.

Pin the two G side panels to the sides of the center panel E. Press them open and your back panel is done too!

Sew the front and pack panels together on one side only. When the whole outside shell of the tote is one piece, adhere them with heat to the foam interfacing piece measuring 25” x 12 ¾”.

Now it’s time to get creative and quilt some stitches onto your tote bag. If you want to keep it simple quilt along the seam lines to emphasize your center block. Just stay away from quilting that back pocket closed.

Great! Now press and set aside. Since you already have your quilting foot on the machine, let’s put some stitches on the bottom of the tote with piece M and the 9 ¾” x 4” interfacing. First press to adhere the pieces together then add some quilting. Now, you will round the corners using your 2” round, such as a lid, spool, circle cut out, whatever works. Good, set this bottom quilted piece aside for later.

Let’s move on to the the handles. You will press two of the L pieces onto the 21 ½” x 2” piece stabilizers, one on each. Adhere them with heat then pin the remaining L pieces right sides together with the stable pieces. Us the same 2” round from the last step to round both ends of both handles.

Then sew leaving a 2” gap at the center of the handle, which you will use to turn the fabric right side out. After your seam is sewn, trim small v’s around the curved ends being careful not to cut through the seam line.

Turning the handles right side out takes some coercing and lots of tugging but you’ll get it. Once all the edges are pushed out, I like to spray my seams and press them. This helps get that nice straight edge on your handles. Tuck in the open gap and run a seam along the edge of each handle 1/8” to a ¼” from the edges. 

Now we’re going to attach the handles. Measuring the placement of your handles must be precise. We don’t want your tote bag looking lopsided. I measured from the top corners of the front panel 2” down and 2 ½” in from the sides. Mark it, pin down the handles and sew. Attaching my handles I made a D shape with my sewing machine. Use the same measurements and placement to attache the handles onto the back panel.

Now that the handles are attached to the outer shell you can attach the two side seams of the front and back panel. Sew and press the seam. It should be a large cylinder with open bottom and top. Remember the quilted bottom we made with the M piece? Get that piece and fold it in half lengthwise, mark the crease at the ends with a fabric pen. You will pair the markings with the side seams of the outer shell of the tote. With right sides of the fabric together, carefully pin from the curved edges out to the straight sides. I use lots of pins here. Sew along those edges slowly.

Turn the purse shell right side out and press along the bottom seam to get a nice finish. OOOooohhhh! It looks so good right?

Can’t forget about the inside lining though. Let’s attach the zipper pocket. It’s a simple technique, but always makes me feel like a pro afterwards. Grab one of your F pieces. You will mark it as shown on the wrong side of the fabric (excuse my mistake drawing it on the front). I measured 1” down from the top edge, centered and drew a long rectangle with disappearing ink that measures 5 ½” x ½”. On the inside of the rectangle, I drew a line down the center with two V’s on the ends reaching the corners. More on this in a sec.

Pin the marked F piece right sides together with the L inside panel piece. Line it up 3” down from the top edge, centered. Sew on the perimeter rectangle line.

When that is done, with a pair of scissors cut through both pieces of fabric on the center line and the V’s on the ends. Careful not to cut through the seam. Now for a magic trick, pull the F piece through the opening you just cut, to the back side of the L piece and press the rectangle opening. Tada! Press and you have a crisp opening for your zipper now.

Pin the zipper inside the pocket panel and sew. Slowly sew over the zipper and the L panel. I hate when my needle breaks so I go at snails pace on this step. 

Now get that second F piece and pin it right sides together with the newly zippered F piece. As you sew them together, be careful not to snag the larger L panel. Press and done.

Pin left and right sides of the L & C pieces together, but leave the bottom and top open. It’s starting to look like a purse lining, right?

Well, almost. We need the bottom J piece. Grab that 2” round again and trace along the four corners of the J piece. Trim them round, then fold the J piece in half lengthwise to find the center points at both ends and mark with your fabric pen. Line up the end markings with the side seams of the tote’s inside lining. Pin and sew. Again, those curves can be tricky, go slowly. Press.

We are now ready to insert the lining into the tote bag shell. Tuck in the bottom corners nice and snug. I like to match the lining seams with the shell seems to keep it all straight. You may notice the lining is sticking out over the shell a bit at the top. This is great because it’s better to have an excess than for it to be too short. Go ahead and trim the lining so the top is flush with the out shell of the purse. Pin and run a quick 1/8” seam along the top to get it all in place for the final step, the edge binding.

Take your two H pieces and sew the ends together with a diagonal seam and press. Fold the H pieces in half lengthwise, pressing it straight on the fold to make your bias binding.

Pin the raw edge of your bias binding on the outside of the tote bag and sew a ¼” seam along the top.

Press and fold it in to the purse. You will secure the binding to the inside of the purse lining, I like to hand stitch this step but you’re welcome to do it by machine if you prefer. That is the last stitch!

Hey, this pattern is not too bad for having to retrace my steps. I hope it was helpful.

Your carry all, library, toys, coloring books, baby dolls Favorite Block Tote Bag is all done and ready to be used. I can already see your little ones enjoying it as much as my girls.

I would love any feedback you want to leave in the comments. And I would love YOU even more if you shared your makes with me on Instagram @linenbouquet with the hashtag #favoriteblocktotebag. This way I can see and share it on my stories as well.

Thanks for being so great. Have a happy sew day friends!

With love, Jasmine

Ivy Rayne Fabrics Giveaway!

Hello Dear Friend,

As you may know, I had an Etsy shop selling fabrics just a couple years ago. It was a lot of fun but after some time I decided to give myself a break. Homeschooling my girls and quilting all the things is keeping me very busy now. With that said, I understand the inner workings of the fabric business and how difficult it can be to get recognition within the vast quilting community. If there is any way I can promote another shop owner and their business that is what I plan to do.

When Tammie at Ivy Rayne Fabrics reached out to me about her very new online shop, my answer was a quick, “I’m happy to help!” She’s currently running all the backend to-do’s, keeping customers happy and marketing. Those are all full-time jobs. You’re doing amazing Tammie!

So let me introduce to you Tammie from Ivy Rayne Fabrics!

As a mother of three older teens (two graduated) I finally found myself with a bit of extra time to pursue my dream of owning a fabric and quilt shop.  Unfortunately, Covid took away any possibility of opening a brick and mortar. I wasn’t going to let that stop me! After a ton of work and research I took my idea online where Ivy Rayne Fabrics was born.  The shop is named after my daughters. My dream became a reality when I launched the site on Novmeber 1, 2020. 

At a very young age, my Gram taught me to sew and I’ve never stopped. In the large world of sewing, quilting is my passion. This extended into my love for fabric. It is both comforting and therapeutic to curate collections for my shop.

~Tammie of Ivy Ranyne Fabrics

I could not agree more! It is so fun pairing fabrics and nothing gets me as excited as a new pretty stack to work with. I’m sure you’re the same, for this reason I thought it would be fun to share one of the highlights of Tammie’s shop which is the FQ Monthly Subscription bundles that she handpicks herself. Each bundle includes 5 fat quarters and extra goodies. Here’s the fun January parcel I received.

Do you see those deep saturated hues and fun designs? All five prints are from the Florida collection designed by Sarah Watts of Ruby Star Society that I think Tammie paired masterfully. The whole package included these fat quarters with a prompt and interfacing to design your own masks and coupon code (for more fabric!). These designer fabrics come at a great discount when subscribing to the monthly orders.

Every month you’ll find new surprises added to the subscription bundles like quilt block patterns created specifically for Ivy Rayne subscribers only. You’re gonna love ’em!

Tammie has a wide range of manufacturers she works with so the fabrics offered in her shop come from well known companies like Moda, Ruby Star Society, Monaluna, Tula, Art Gallery Fabrics and more. Definitely check out her shop (support small!) and welcome her to the community.

So, is this January bundle part of the giveaway? Nope. Tammie was so kind to offer an extra generous 9 piece fat quarter fabric GIVEAWAY showcasing some more designer prints from Ivy Rayne. For you, we have the Modern Love Organic Poplin collection from Monaluna.

Ooooohhhh they are so cute! You can see the forest animals, florals, modern details drawn in blues, pink and a warm clay red. These lovelies are going to one lucky winner. The entry rules are super easy, just go to my Instagram account @linenbouquet for the instructions.

I personally like when giveaways are quick so hurry to enter before the deadline, January 21st.

One more thing, head over to Ivy Rayne Fabrics to see all products Tammie has in stock and sign up for the next curated FQ Monthly Subscription bundle. You will be so glad you did.

I must be off now, my new Florida fabrics are calling my name and I already have some ideas of what to make with them. 😉 Good luck friends!

with love, Jasmine

A Year of Techniques – Giveaway

Hello dear friend. Thank you for the love and support over this new blog. I was on pins and needles before publishing it, but you eased my nerves with your kindness.

I want to share with you a very exciting partnership I have with a quilty friend that I met in an unexpected way. One evening, while rushing to my daughter’s soccer practice I spotted a couple quilts laying on the grass in rich purple tones. Trying to play it cool, I smiled at the family sitting on them but really just wanted to get a better look at the quilts. It’s darn near impossible for a quilter to ignore such a thing. In my effort to not act like a creeper, I set my folding chair next to the family and casually asked, “Did you make those quilts?” Well needless to say, the conversation took off from chatting about the the two quilts to exchanging Instagram account information. It was pure serendipity! That other soccer mom was none other than the incredibly talented Felicia from Felicia’s World a quilt pattern designer.

When you meet a fellow quilter it’s like finding a soul sister. Not only did we connect over our love for the craft but now we’re partnering together and sharing with you some great sewing projects. One very exciting project is a series called, “Year of Pincushions,” a collection of monthly pincushion patterns that will offer seasonal and holiday designs. At the end of the full 12 months you will have expertly crafted pincushions, and the blocks will double as pieces of a complete mini quilt sampler. It’s going to be gorgeous!

January’s Pincushion pattern just released this past weekend. The pattern design is a winter wonderland using hexies in a smart snowflake layout with snow covered hills, tiny fir trees and quaint little cottages. You’re gonna love this pattern!

I feel incredibly lucky to test the patterns for this series and show them off here on my blog from time to time. My goal when sharing a pattern with you is to share the techniques used from my perspective. Felicia is a long time quilting pro that I look forward to learning from so I can pass along the information to you!

While dreaming up my vision for the January pincushion, I landed on a lovely assortment of Tilda fabrics which includes cottons from the Maple Farm, solids and chambray collections. You’ll notice a couple other fabrics thrown in to round out my color palette but I really tried to keep the colors non traditional and soft.

The top block which will also be used in the end of year mini quilt sampler, uses English paper piecing hexagons to form a delicate snowflake. To be honest I was a bit intimidated by the tiny hexies. I figured the small size would be difficult to sew but once they were basted onto the papers (using a glue stick and heavy book flatten), the snowflake was assembled in no time and they even kept their shape really well. Smaller project, less stitches! Whoohoo! Its a cinch to appliqué this beauty onto the dark blue chambray.

The technique that is new to me in this pincushion pattern is the needle turn appliqué. Yes, I admit I’m a needle turn newbie. Although the technique seems daunting, I’m pretty psyched to try it. Especially since I’ll be making these adorable snow capped cottages on the side panels. Eeeek! Learning new sewing techniques always excites me. My fave is when I get to sew by hand. This is a win, win!

So I’m gonna get to work on these tiny details and would love it if you joined me! Get your “Year of Pincushions” pattern here to sew along with Felicia and I. We have more details to come if you follow us on Instagram @Linenbouquet and @FeliciasWorldQuilting

An extra bonus for being my bloggy friend, I have one FREE January Pincushion pattern to offer here! Just enter your email to follow my blog posts and I will draw a name at the end of the week. Thanks again for being so great.

Hugs, Jasmine

Enter your email address to follow along with Jasmine and your chance to win the January Pincushion pattern!